Item |
Photo |
Description |
Bids |
High Bidder |
Current Amount |
Next Bid Required |
Your Bid |
Your Maximum |
0 |
| EFFECTIVE IMMEDIATELY!! BIDDERS NOT PICKING UP ON THE SCHEDULED DAYS - WILL NO LONGER BE ABLE TO BID!! THESE DAYS ARE SET ASIDE FOR THAT PURPOSE! SO PLEASE PLAN ACCORDINGLY - PICK UP DAYS AND TIMES MEAN PICK UP DAYS AND TIMES!!
|
|
|
|
|
ended |
1
more pics |
 | A John Deere M wide front tractor with a woods belly mower. The tin looks good and is straight. The tires all look good. This has a belt pulley for powering a saw rig. The oil dip stick shows some moisture in the engine. There is a shop manual included.
|
28 |
1031 |
1,310.00 |
|
ended |
2
more pics |
 | A 2007 Ford E-350 van with 203,566 miles on the odometer. It has a 5.4 liter V-8 engine. The body has a lot of rust. The owner says the front end needs work, the rear end is bad and the battery does not hold a charge. Three tires are barely usable. The fourth has no tread. It starts, runs and was driven in. It has Weatherguard shelves and drawers in it. And lots of electrical fittings that are included. Additional fees: Documentation fee $30.00, Registration tax $35.00, Plate fee $8.00, Title Tech fee $2.25, PSV fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $11.00 and Sales Tax will be $10.00. Minnesota State Law - when purchasing a vehicle, you MUST provide your Insurance Company, Policy Number and Expiration Date as we will need this information to bring to the DMV when we do the title work.
|
14 |
7965 |
420.00 |
|
ended |
3
more pics |
 | A Farmall Cub Tractor. This starts and drives the way it should. But the starter has a newer style soliniod that is electronic and not manually engaged. It needs to be wired to a starter button. One rear tire is new. The other three have weather checking. Currently it needs to be pull started or a jumper wire used on the starter.
|
27 |
3881 |
1,252.00 |
|
ended |
4
more pics |
 | A 2007 GMC 2500 HD 4X4 with 105,555 miles on the odometer. It has a 6.0 liter Vortec engine. The body has rust over both rear wheels. The bottom of the drivers door is starting to show rust. The rest of the body has a few scuffs, scratches and a couple of small dents.the tires look to be good. All the glass is good. The box is spray lined. It has a roof rack and a work vehicle rotating yellow light. The interior is a little dirty but in decent condition. This was municipal owned and maintained. All the service records are included. Four different shop manuals are included. Additional fees: Documentation fee $30.00, Registration tax $35.00, Plate fee $8.00, Wheelage tax $15.00, Title tech fee $2.25, PSV fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $11.00 and Sales Tax will be 6.5% of final purchase price. Minnesota State Law - when purchasing a vehicle, you MUST provide your Insurance Company, Policy Number and Expiration Date as we will need to have this information to bring to the DMV when we do the title work
|
38 |
1854 |
5,255.00 |
|
ended |
5
more pics |
 | A 2011 Towmaster T40T tilt bed equipment trailer. It is rated for up to 47,040 pounds GVWR. This has air brakes. The bed is still usable but looks a little rough. The tires look good. It has a pintle hitch. The tilt bed measures 24 feet long plus four feet in the front that does not tilt. It measures 103 inches wide on the outside of the frame. Additional fees: Documentation fee $30.00, Registration fee $198.00, Plate fee $6.00, PSV Fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $11.00 and Sales Tax will be 6.5% of final purchase price.
|
70 |
1854 |
10,050.00 |
|
ended |
6
more pics |
 | A 2006 Towmaster tilt bed trailer model T12T. It has a 15,200 pound GVWR. The bed measures 14 feet plus a 1 foot beavertsil long. It measures 81 inches wide. The fenders are rusty and the frame shows rust starting. The bed is usable but will soon need a new deck. The tires look good. This has a pintle hitch. Additional fees: Documentation fee $30.00, Registration Tax $11.00, Plate fee $6.00, Title tech fee $2.25, PSV fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $11.00 and Sales tax wil be 6.5% of final purchase price.
|
30 |
8347 |
2,450.00 |
|
ended |
7
more pics |
 | A 2010 Ford E-450 Ambulance with 206,725 miles on the odometer. The 6.8 liter V-10 engine was replaced with a factory remanufactered long block at a local Ford dealer at 148,000 miles. The fiberglass body is in good condition with all the compartments operating the way they should. The back end of this has an aluminum body. The tires are good. The right front fender shows some rust starting behind the mud flap. Additional fees: Documentation fee $30.00, Registration tax $38.00, Plate fee $8.00, Wheelage tax $15.00. Title tech fee $2.25, PSV Fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $11.00 and Sales Tax will be 6.5% of final purchase price. Minnesota State Law - when purchasing a vehicle, you MUST provide your Insurance Company, Policy Number and Expiration Date as we will need to have this information to bring to the DMV when we do the title work
|
33 |
3087 |
3,950.00 |
|
ended |
8
more pics |
 | A 2009 Chevrolet Aveo LS with 102,183 miles on the odometer. It has a 1.6 liter 4 cylinder engine and a 5 speed manual transmission. No rust is seen on the body. There is a scuff mark on the rear bumper and a deep scratch in the passenger front door. The tires are good. The glass is good. The interior is in nice condition and clean. Additional fees: Documentation fee $30.00, Registration tax $35.00, Plate fee $8.00, Wheelage tax $15.00, Title tech fee $2.25, PSV fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $11.00 and Sales Tax will be $10.00 Minnesota State Law - when purchasing a vehicle, you MUST provide your Insurance Company, Policy Number and Expiration Date as we will need to have this information to bring to the DMV when we do the title work
|
27 |
3822 |
1,628.00 |
|
ended |
9
more pics |
 | A Yugo SKS rifle in 7.62 X 39 caliber. This is very good condition and is possibly unfired. Winning bidder must be able to pass a NICS test at time of purchase. Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase.
|
23 |
6506 |
555.00 |
|
ended |
10
more pics |
 | A Glenfield Model 60 semi-auto rifle in .22lr caliber. The wood shows light handling marks that could be easily touched up if desired. The barrel has very light freckling that is also an easy fix. Overall it appears to be in decent condition. Winning bidder must be able to pass a NICS test at time of purchase. Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase.
|
11 |
2220 |
130.00 |
|
ended |
11
more pics |
 | 40 rough cut Pine 2 x 8's that are 12 feet long.
|
21 |
7641 |
410.00 |
|
ended |
12
more pics |
 | 55 rough cut Pine 2 x4's that are 8 feet long.
|
12 |
7641 |
210.00 |
|
ended |
13
more pics |
 | A bolt action Glenfield Model 50 - 12 Gauge Shotgun. It has a 28 inch barrel with improved cylinder choke. The stock is black plastic. It is in overall decent condition with some freckling starting on the barrel and some rust on the trigger guard. It has a detachable magazine that shows some rust also. This would make a good multi-purpose bird/deer gun. Winning bidder must be able to pass a NICS test at time of purchase. Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase.
|
3 |
6480 |
68.00 |
|
ended |
14
more pics |
 | A 2000 Chevrolet 2500 4X4. The miles are unknown. It has a 6.0 liter Vortec engine. The body has rust all around. There are deep scratches in the hood. The tires look to be in good condition but one leaks air slowly. The hood will not stay closed past the safety latch. The glass is all good. The drivers seat is ripped. The brake peddle is very low and it is believed that a line is rusted off. The gas is old. This starts runs and was driven in. Additional fees: Documentation fee $30.00, Registration tax $35.00, Plate fee $8.00, Wheelage Tax $15.00, PSV Fee $3.50, Transfer Tax $10.00, Title/transfer fee $8.25, State filing fee $11.00 and Sales Tax will be $10.00. Minnesota State Law - when purchasing a vehicle, you MUST provide your Insurance Company, Policy Number and Expiration Date as we will need to have this information to bring to the DMV when we do the title work.
|
8 |
1384 |
684.73 |
|
ended |
15
more pics |
 | A new in the box Super Comanche single shot pistol in .45LC/410 shotgun caliber. Winning bidder must be able to pass a NICS test at time of purchase and have either a Permit to Purchase or a Permit to Carry. Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase and have either a Permit to Purchase or a Permit to Carry.
|
21 |
7634 |
212.00 |
|
ended |
16
more pics |
 | A smaller 2001 skid Steer trailer that is rated for 4500 pounds. The bed measures 9 feet long by 68 inches wide. It has ramps that are attached. There is some rust. This has untested surge brakes. It has storage compartments on the front. It requires a 2 inch ball for towing. Additional fees: Documentation fee $30.00, Registration Tax $8.00, Title tech fee $2.25, PSV fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $11.00 and Sales Tax will be 6.5% of final purchase price
|
17 |
8349 |
850.99 |
|
ended |
17
more pics |
 | Approximately 270 square feet of AZEK pavers. These are about 4 years old and used, but appear to be in good condition.
|
16 |
4493 |
155.00 |
|
ended |
18
more pics |
 | 10 boxes of Culture Stone. Great for creating your new fireplace. Unknown as to how many square feet there is.
|
17 |
7432 |
79.00 |
|
ended |
19
more pics |
 | A Remington Model 770 in .270 Winchester caliber. It has a 3 x 9 x 40 scope on it. It appears to be in good condition with no handling marks seen. Winning bidder must be able to pass a NICS test at time of purchase. Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase.
|
10 |
2126 |
335.00 |
|
ended |
20
more pics |
 | A vintage nickel plated revolver in 32RF caliber. On top it says HJ Double Action. Model 1900. Lots of the Nickel is missing. The cylinder Does not lock up with the action very well so it is advised not to shoot this as is. Winning bidder must to be able to pass a NICS test at time of purchase and have either a Permit to Purchase or a Permit to Carry. Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase and have either a Permit to Purchase or a Permit to Carry.
|
10 |
4357 |
33.00 |
|
ended |
21
more pics |
 | Four 12 foot by 6 foot chain link fence panels.
|
14 |
4345 |
142.00 |
|
ended |
22
more pics |
 | Four 12 foot by 6 foot chain link fence panels
|
13 |
4345 |
135.00 |
|
ended |
23
more pics |
 | Four 12 foot by 6 foot chain link fence panels
|
19 |
6873 |
170.00 |
|
ended |
24
more pics |
 | Four 12 foot by 6 foot chain link fence panels
|
24 |
6873 |
180.00 |
|
ended |
25
more pics |
 | A Derringer pistol made by F.I.E. In Miami Florida. Model D38. This is .38 Special caliber. It has two sets of grips included. This appears to have been carried some and could use cleaning. Winning bidder must be able to pass a NICS test at time of purchase and have either a Permit to Carry or a Permit to Purchase. Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase and have either a Permit to Purchase or a Permit to Carry.
|
15 |
7634 |
360.00 |
|
ended |
25A |
| EFFECTIVE IMMEDIATELY!! BIDDERS NOT PICKING UP ON THE SCHEDULED DAYS - WILL NO LONGER BE ABLE TO BID!! THESE DAYS ARE SET ASIDE FOR THAT PURPOSE! SO PLEASE PLAN ACCORDINGLY - PICK UP DAYS AND TIMES MEAN PICK UP DAYS AND TIMES!!
|
|
|
|
|
ended |
26
more pics |
 | 20 rounds of new .30-30 Winchester ammunition. Remington Core-Lokt 150 grain SP.
|
11 |
2833 |
32.00 |
|
ended |
27
more pics |
 | 24 rounds of new .270 Winchester ammunition. Federal Classic 130 grain Hi-Shok soft point.
|
10 |
8347 |
27.00 |
|
ended |
28
more pics |
 | 20 rounds of new .30-40 Krag ammunition. Remington Core-Lokt 180 grain PSP.
|
6 |
5281 |
21.00 |
|
ended |
29
more pics |
 | An 8 horsepower, electric start snowblower made by North Star. It has a Tecumseh engine. One tire goes flat. This ran a year ago but was not started this year. It turns over with compression.
|
15 |
1058 |
202.22 |
|
ended |
30
more pics |
 | A Lazer Mag Strike Master Ice auger. It has an 8 inch auger. This turns over with compression but has no gas to test it further.
|
12 |
1058 |
37.00 |
|
ended |
31
more pics |
 | Ice fishing special. Two folding chairs, a folding table, two minnow buckets, a heavy rod, a Coleman lantern, bobbers, sinkers and a small empty tackle box.
|
10 |
8003 |
16.00 |
|
ended |
32
more pics |
 | A vintage grain fanning mill and separator. There are several different size screens included.
|
12 |
2401 |
34.00 |
|
ended |
33
more pics |
 | Extra long extensions for socket wrenches. The 1/4 inch is Snap On. The large one is 1/2 inch drive with a 3/8 socket.
|
21 |
1862 |
54.11 |
|
ended |
34
more pics |
 | Metric and SAE swivel impact sockets made by Genius. 3/8 drive.
|
26 |
6634 |
70.00 |
|
ended |
35
more pics |
 | A set of Matco metric swivel impact sockets. 3/8 drive. From 10mm to 19 mm.
|
16 |
6634 |
59.00 |
|
ended |
36
more pics |
 | 56 rough cut Pine 2 x 6's that are 12 feet long.
|
17 |
7641 |
370.00 |
|
ended |
37
more pics |
 | Assorted tools. Milwaukee, Sears, Cornwell, Pittsburgh. A click type 1/2 inch drive torque wrench. Sockets. Torx. And more.
|
21 |
5596 |
49.11 |
|
ended |
38
more pics |
 | A set of Metric swiveling ratchet wrenches made by Blue Point. They are dirty but the set is complete.
|
30 |
8244 |
133.00 |
|
ended |
39
more pics |
 | A Stihl Model MS 193T chainsaw with a 14 inch bar. The seller purchased this Saw new a couple of years ago and never started or used it. It has old gas in it from the store he bought it from. But it started and runs the way it should. It is recommended that the gasoline be dumped and new put in.
|
16 |
6863 |
253.00 |
|
ended |
40
more pics |
 | A Eurocardan PTO shaft. 1 3/8 six spline X 1 3/8 six spline. It measures 42 inches long compressed and 65 inches long extended. This looks like new but has been used.
|
5 |
1595 |
51.00 |
|
ended |
41
more pics |
 | Two ratchet type chain binders for 5/16 or 3/8 chain. Both were made in China.
|
11 |
5377 |
32.00 |
|
ended |
42
more pics |
 | Three DeWALT model DCS371 cordless band saws. 20 volt. All three tested and work. One has noisy bearings. One is missing the blade. These are the Tool only. No batteries or charger included.
|
15 |
8347 |
107.00 |
|
ended |
43
more pics |
 | A Ramset Viper Construction Fastener Tool.
|
5 |
5130 |
5.00 |
|
ended |
44
more pics |
 | A 6 drawer believed to be a Craftsman tool box. It is dirty and the lock is missing but it is still very usable. The tools in the drawers are included. There are a lot of drill bits.
|
12 |
7922 |
22.00 |
|
ended |
45
more pics |
 | A four drawer Craftsman center tool box.
|
10 |
5891 |
17.00 |
|
ended |
46
more pics |
 | A ten ton hydraulic body repair kit made by ATD.
|
13 |
8127 |
117.77 |
|
ended |
47
more pics |
 | A 2 1/2 ton floor jack. Tested and works.
|
14 |
4935 |
39.00 |
|
ended |
48
more pics |
 | An extension for a four wheeler rack for carrying larger loads . Made by Moose. It measures 41 inches long by 29 inches wide by 13 inches deep. The back has a gate that flips down for easier loading.
|
21 |
1760 |
41.00 |
|
ended |