| Item |
Photo |
Description |
Bids |
High
Bidder |
Current
Amount |
Next Bid
Required |
Your
Bid |
Your
Maximum |
1
more
pics |
 | A Matco Roller tool box that measures 76 inches long. It has 21 drawers. It is dirty but should clean up very nice. There are no keys for the locks. This has a variety of tools still in the drawers that are included. There is a new dust/storage cover for the box that has never been used.
|
19 |
7606 |
1,300.00 |
|
ended |
2
more
pics |
 | A light plant powered by a Kubota Diesel engine. The hour meter shows 11,020 hours. This starts, runs and operates but two lights of the four do not light up.
|
18 |
7965 |
961.00 |
|
ended |
3
more
pics |
 | 100 rounds of .223 Remington ammunition. These are reloads. 62 grain Barnes Copper Bullets. 23 grains of H 4895 powder. These were loaded for Pig Hunting.
|
12 |
7967 |
75.33 |
|
ended |
4
more
pics |
 | 60 rounds of .22-250 Remington ammunition. These are handloads using new brass. 55 grain SP Bullets. 33 grains of IMR 4064 powder. 3400 FPS.
|
10 |
3948 |
30.00 |
|
ended |
4A
more
pics |
 | A Tapco Pro 2000 Aluminum Brake. It measures 10 feet long with a 6 inch throat. This includes a Snap Stand, a sidewinder, a brake buddy, a Pro Citoff tool, miscellaneous rolls of Aluminum flashing and 2 wall mount brackets.
|
26 |
7606 |
1,350.00 |
|
ended |
4B
more
pics |
 | A Lumberjack 25 ton log splitter with a 6.5 horsepower Kohler engine. This can take up to a 25 inch long log. This looks almost new.
|
22 |
6312 |
725.00 |
|
ended |
5
more
pics |
 | A 1948 Mercury 4 door sedan with a flathead V-8 engine. This will start if gas is poured into the carburetor. The body is in fairly good condition. A couple of small dents and just a little rust can be seen. The interior looks complete but is in poor condition. Some of the glass is cracked. There are new parts in boxes including a fuel tank and brake drums. This car could be easily made into a Rat Rod or it may be worth restoring.
Additional fees: Documentation fee $30.00, Registration tax $35.00, Wheelage tax $15.00, Title tech fee $2.25, PSV fee $3.50, Transfer tax $10.00, Title/tech fee $8.25, State filing fee $11.00 and Sales tax will be $10.00
Minnesota State Law - when purchasing a vehicle, you MUST provide your Insurance Company, Policy Number and Expiration Date as we will need to have this information to bring to the DMV when we do the title work.
|
25 |
4248 |
1,750.00 |
|
ended |
5A
more
pics |
 | A copy of a Winchester Model 86. This was made for Cabelas by Pedersoli in Italy. It is in 45-70 caliber. It is Stainless Steel with a camouflage stock. It has a scope rail and open sights. The barrel measures 19 inches long. This has been handled but never fired. Winning bidder must be able to pass a NICS test at time of purchase.
Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase.
|
25 |
8473 |
830.00 |
|
ended |
5B
more
pics |
 | A Magnum Research Model BFR revolver in 45-70 caliber. This is Stainless Steel and has a 5 1/2 inch barrel. This is new in the box. Winning bidder must be able to pass a NICS test at time of purchase and have either a Permit to Carry or a Permit to Purchase.
Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase and have either a Permit to Carry or a Permit to Purchase.
|
18 |
7022 |
825.00 |
|
ended |
5C
more
pics |
 | A Sig Sauer P220 commemorative pistol in .45ACP caliber. It has a Crimson Trace Lasergrip laser light on it. This has a threaded barrel. It includes a regular magazine and two extended magazines. There is a Galco leather carry holster also included. This has been fired but it is in very good condition. Winning bidder must be able to pass a NICS test at time of purchase and have either a Permit to Purchase or a Permit to Carry.
Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase and have either a Permit to Carry or a Permit to Purchase.
|
23 |
4430 |
750.00 |
|
ended |
6
more
pics |
 | A cab from a Volvo Semi-Tractor. The piece from the left rear is inside the cab. The boat trailer that it is sitting on is included.
|
25 |
5018 |
250.00 |
|
ended |
7
more
pics |
 | A rough cut Oak plank that measures 3 inches thick by 10 inches wide by 22.5 feet long. It has some ant damage at 14 feet. This is still green. It has not been dried.
|
13 |
1699 |
32.00 |
|
ended |
8
more
pics |
 | A Toro Groundsmaster 328-D Mower with 4013 hours on the hour meter. It is powered by a 3 cylinder Diesel engine. This includes a 72 inch mower deck, a Cozy Cab, and a sweeper. The sweeper is missing parts. This runs and operates.
|
27 |
6480 |
1,350.00 |
|
ended |
9
more
pics |
 | A 3 point brush hog with an 80 inch cut. This appears to be in decent condition.
|
21 |
7653 |
695.00 |
|
ended |
10
more
pics |
 | A 3 point back blade made by King Kutter. It has a 7 foot blade. This is in good usable condition.
|
23 |
1595 |
617.00 |
|
ended |
10A
more
pics |
 | A Skid Steer excavator. This has a shop built thumb on it for lifting rocks, brush or logs. The thumb is solid and does not move. The bucket measures 13 inches wide.
|
27 |
3234 |
808.00 |
|
ended |
10B
more
pics |
 | An auger for a Skid Steer. It is a 750 Classic Made by Lowe. It includes an 8 inch bit. The owners manual is included.
|
22 |
2580 |
1,201.00 |
|
ended |
10C
more
pics |
 | A 6 inch auger Bit that will fit the Lowe Auger in lot 10B.
|
21 |
7129 |
143.21 |
|
ended |
10D
more
pics |
 | An auger extension that will fit the Lowe Auger in lot 10B. It measures 28 inches long.
|
18 |
1661 |
93.00 |
|
ended |
10E
more
pics |
 | A 12 inch auger. This does not have the same connection as the Lowe Auger in lot 10B.
|
23 |
2580 |
185.00 |
|
ended |
10F
more
pics |
 | A 3 point box blade made by United Box Blade model 896HD. It measures 8 feet wide and has 8 adjustable scarifiers.
|
31 |
5421 |
675.00 |
|
ended |
10G
more
pics |
 | A rock and stump bucket for a Skid Steer
|
38 |
2824 |
675.00 |
|
ended |
10H
more
pics |
 | An auger extension that will fit the Lowe auger in lot 10B. It measures 28 inches long.
|
15 |
2580 |
46.00 |
|
ended |
11
more
pics |
 | A new uninsulated garage/shed door made by Midland. It measures 8 feet 5 inches wide by 6 foot 3 inches high. All of the mounting hardware is included.
|
18 |
7806 |
60.00 |
|
ended |
12
more
pics |
 | A new uninsulated garage door made by CHI. It measures 8 feet wide by 7 feet high. There is no hardware included.
|
12 |
7606 |
25.00 |
|
ended |
13
more
pics |
 | A fiberglass truck topper made by Raider. The front window is a slider. This measures 76 inches long by 58 inches wide.
|
14 |
5620 |
24.00 |
|
ended |
14
more
pics |
 | An electric Steam Pressure Washer. This is powered by a 6 horsepower 240 volt single phase motor. It has a 150 foot long power cord. The seller states that this works good.
|
12 |
5516 |
295.00 |
|
ended |
15
more
pics |
 | A Mitsubishi diesel powered light plant with 12,377 hours on the hour meter. This starts, runs and operates as it should. All the lights work.
|
8 |
2247 |
988.00 |
|
ended |
16
more
pics |
 | This was a Shriners mini car used in parades. It is a 32 Ford Roadster made by Sharp Mini Cars. It measures 80 inches long. It is powered by a Tecumseh 10 horsepower single cylinder engine. It has a three speed transmission plus reverse. Electric start. Head lights and tail lights. The seller says it will do 30 MPH. This runs and works but needs a battery. Picture this with a 17 horsepower Kawasaki lawn mower engine with Nitrous.
|
36 |
3378 |
2,445.00 |
|
ended |
16A
more
pics |
 | A Stihl Model SR 450 backpack sprayer/duster. This will spray Chemicals or other liquids. This is new.
|
23 |
6360 |
361.00 |
|
ended |
17
more
pics |
 | Fifteen portable work lights. With eight shop built stands. They each stand 70 inches high. None have been tested.
|
12 |
1146 |
37.00 |
|
ended |
18
more
pics |
 | Sixteen portable work lights. With 8 shop built stands. None have been tested.
|
17 |
1260 |
44.00 |
|
ended |
19
more
pics |
 | A DeWALT Vacuum Cleaner. This operates on 110 or 18 volts. The hose is included but no other accessories. The battery may or may not be good. No charger is included. Also there is an 8 gallon Shop Vac that is missing one wheel. Both of these have been tested and work.
|
14 |
3393 |
26.00 |
|
ended |
20
more
pics |
 | An assortment of pliers. The large water pump pliers measure 20 inches long.
|
16 |
7606 |
24.00 |
|
ended |
21
more
pics |
 | A fairly heavy duty off road trailer. It has floatation tires. The tilt bed measures 68 inches long by 48 inches wide. It has a rear gate that swings open. This would be good behind a 4 wheeler or side by side to haul extra gear or an Elk out of the mountains. It has a hitch that requires a 2 inch ball.
|
33 |
7832 |
500.00 |
|
ended |
21A
more
pics |
 | A spear house that measures 42 inches wide by 66 inches long. The outside is Galvanized tin. It has been spray insulated.
|
13 |
6936 |
155.00 |
|
ended |
22
more
pics |
 | A Craftsman snow blower with a 9 horsepower motor and a 28 inch cut. The rewind on this needs repair but the electric start works.
|
17 |
2130 |
133.00 |
|
ended |
23
more
pics |
 | A Multiquip Whisperwatt Plus Generater/Welder. Model DCX-8.8 WSS. 8.8 KW generator and 270 amp DC Welder. This is powered by an Isuzu Diesel engine. This starts, runs and operates like it should. No welding leads are included.
|
32 |
7641 |
584.99 |
|
ended |
24
more
pics |
 | A commercially made off road Go-Cart. This has electric start and reverse. The electric choke is not working and the cable that engages reverse does not work. It has a four stroke single cylinder engine. This starts, runs and operates.
|
19 |
2377 |
445.00 |
|
ended |
25
more
pics |
 | An E-Z Go Golf cart with a gasoline engine. This starts, runs and operates but the engine has low compression. A new cylinder jug, piston, rings and gaskets are included.
|
23 |
6628 |
600.00 |
|
ended |
26
more
pics |
 | A Craftsman pressure washer. 2800 PSI. 7.0 horsepower. This has the water blown out of it for winter storage.
|
17 |
7525 |
59.00 |
|
ended |
27
more
pics |
 | A new rear tractor rim. Size 10 X 24 loop. Allis Chalmers and International.
|
20 |
7472 |
140.00 |
|
ended |
28
more
pics |
 | A John Deere Number 9W three point sickle mower. It has a 7 foot mower. It appears to be in decent usable condition.
|
13 |
3881 |
150.00 |
|
ended |
29
more
pics |
 | A King Kutter 5 foot brush hog. 3 point PTO driven. It appears to be in decent used condition but could use a weld about 5 inches long or leave as is.
|
18 |
5421 |
430.00 |
|
ended |
30
more
pics |
 | A Honda EU 1000 portable generator. This started on one pull and operates as it should.
|
26 |
7022 |
465.00 |
|
ended |
31
more
pics |
 | Surge boys bike that is in good shape but the tires will need air.
|
12 |
2824 |
42.00 |
|
ended |
32
more
pics |
 | Wooden desk and a small round table. Not sure if all the desk is there or if there is extra pieces.
|
|
|
|
|
ended |
33
more
pics |
 | A wooded coat rack that is 65 inches tall and a wooden cloth drying rack.
|
6 |
3053 |
6.00 |
|
ended |
34
more
pics |
 | Vintage in table Singer sewing machine this is untested but appears to be in good shape. There is some markings on the table.
|
4 |
1267 |
7.00 |
|
ended |
35
more
pics |
 | A vintage Singer sewing machine this is untested so it my need work also a T-Fal cooker and more
|
3 |
5078 |
3.00 |
|
ended |
