Lots4Bid.com
Home
Register to Bid
All Online Auctions

Find us on Facebook


Lots4Bid
WRENSHALL MAN SALE #178 -CLOSED - CLOSING PROCESS BEGINS WEDNESDAY, FEBRUARY 13, 2019 AT 7:00 PM

Item Description
0.EFFECTIVE IMMEDIATELY!! BIDDERS NOT PICKING UP ON THE SCHEDULED DAYS - WILL NO LONGER BE ABLE TO BID!! THESE DAYS ARE SET ASIDE FOR THAT PURPOSE! SO PLEASE PLAN ACCORDINGLY - PICK UP DAYS AND TIMES MEAN PICK UP DAYS AND TIMES!!

1.A 2002 Ford E150 cargo/work van with 175,463 miles on the odometer. It has a 5.4 Triton V-8 engine and automatic transmission. It has a 120 volt power inverter installed. The body has rust all around but no significant dents are apparent. The tires are in very good condition and are mounted on Aluminum American Racing rims. The drivers seat shows wear. There is no A/C or cruise control. It does have power windows and locks. There is a cargo divider and shelves in the back. It has a receiver hitch. It starts, runs, moves and stops. This was driven in.

Additional fees: Documentation fee $30.00, PSV Fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $10.00, Sales tax will be 6.5% if over $3,000.00 or $10.00 if under $3,000.00.

Minnesota State Law - when purchasing a vehicle, you must provide your Insurance Company, Policy Number, and Expiration Date as we will need to have this information to bring to the DMV when we do the title.

2.A 2008 Chevrolet Impala with 155,509 miles on the odometer. It has a 3.9 liter engine. The body is in good condition with just a couple minor scratches. The hood is missing a little paint. The interior is good but needs cleaning. The center console is missing. The tires are Goodyear high performance and in good condition. All the glass is good. This car starts, runs and drives as it should.

Additional fees: Documentation fee $30.00, PSV fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $10.00, and Sales tax will be 6.5% if over $3,000.00 or $10.00 if under $3,000.00.

Minnesota State Law - when purchasing a vehicle, you must supply your Insurance Company, Policy Number, and Expiration Date, as we will need to have this information to bring to the DMV when we do the title.

3.A JC Higgins .22lr model 103.228. It is a bolt action with a clip type magazine. The barrel measures 23 inches long. The stock has some minor scratches in it but the metal looks very good. Winning bidder must be able to pass a NICS test at time of purchase.

Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase.

4.A 2004 Ford F-150 XLT 4x4 pickup with 249,764 miles on the odometer. The engine is a 5.4 liter V-8. It has good tires and glass. There is rust on the body. The seat is has a couple big of holes in it. There is a receiver hitch. This starts, runs and was driven in.

Additional fees: Documentation fee $30.00, Plate fee $6.00, PSV fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $10.00, and Sales Tax will be 6.5% if over $3,000.00 or $10.00 if under $3,000.00.

Minnesota State Law - when purchasing a vehicle, you must supply your Insurance Company, Policy Number, and Expiration Date, as we will need to have this information to bring to the DMV when we do the title.

5.A Ruger Model 10-22 rifle in .22lr caliber. It includes a Simmons 4x32 scope and a barrel mounted Mag-Light. This is Stainless Steel Gun with a red LazerMax Built into a Ruger black plastic stock. The barrel and the stock have some light scuff marks but nothing serious. There is no magazine included but they are readily available.  Winning bidder must be able to pass a NICS test at time of purchase.

Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you  MUST be able to pass a NICS test at time of purchase.

6.A 1998 International 4700 DT 466E digger Derrick truck. It shows 180,187 miles on the odometer and 13,197 hours on the hour meter. It has a Diesel engine and a 6 speed Plus transmission. It is believed that the shift fork is bent as it jumps out of 6th gear. The crane and auger were were built by Altec. There is a hydraulic winch on the front and auxiliary hydraulics on a reel in the back. All the compartment doors open and the latches work. The drivers door is hard to open from the outside. The drivers seat is an air ride seat. The passengers seat is ripped. The boom section for the crane slowly goes out on its own as the truck runs. When the PTO is engaged there is a small hydraulic leak on the right rear outrigger. The tires look to be in very good condition and the back are snow tires. This truck was in service as late as November. It was driven in. 

Additional fees: Documentation fee $30.00, Registration tax $356.00, Plate fee $6.00, PSV fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $10.00, and Sales tax will be 6.5% of final purchase price.

Minnesota State Law - when purchasing a vehicle, you must provide your Insurance Company, Policy Number, and Expiration Date as we will need to have this information to bring to the DMV when we do the title.  A DOT number is only required if this vehicle is going to be used commercial.

7.A 2006 Ford E-350 Super Duty work van with 197,039 miles on the odometer. It has a 5.4 liter V-8 engine.the body is starting to show rust. The drivers seat has a hole in it. The tires and the glass are good. It has a receiver hitch. There are two ladder racks on the roof. There is a cargo divider and Weatherguard shelves and drawers in the back. This starts, runs, and was driven in.

Additional fees: Documentation fee $30.00, Registration tax $90.00, Plate fee $6.00, PSV fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $10.00, and Sales tax will be 6.5% if over $3,000.00 or $10.00 if under $3,000.00.

Minnesota State Law - when purchasing a vehicle, you must provide your Insurance Company, Policy Number, and Expiration Date, as we will need to have this information to bring to the DMV when we do the title.

8.A 50,000 BTU Mr. Heater Big Max gas heater. This has been set up for propane. This appears to be new with very minor cosmetic shipping damage. It has been tested and works.

9.A Hi-Point model JC in 40SW caliber. It comes with one magazine. It has some handling marks and some scratches. This was tested and operates as it should.  Winner bidder must be able to pass a NICS test at time of purchase and have either a Permit to Purchase or a Permit to Carry.

Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase and have either a Permit to Purchase or a Permit to Carry.

10.A DeWALT 20 volt brushless Compact Drill/Driver three speed Impact Driver Combo Kit. DCK283D2. This kit contains a drill, an impact driver, two batteries, a charger and a carry bag. This is new in an unopened box.

11.A Taurus Model 66 .357 Magnum with a 4 inch barrel. The rear sight is adjustable. The gun is Stainless Steel and has Hogue Monogrips added. This has a lot of scratches and marks in the metal. Part of the front sight is missing. But the action feels smooth and the inside of the barrel looks good.  Winning bidder must be able to pass a NICS test at time of purchase and have either a Permit to Purchase or a Permit to Carry.

Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase and have either a Permit to Purchase or a Permit to Carry.

12.A Weatherby Vanguard in .22-250 caliber. It has a Mueller Tactical scope that has 8.5-25 x 44 power. It also comes with a Harris bi-pod and a sling. The gun needs a good cleaning but appears to be in good condition.  Winning bidder must be able to pass a NICS test at time of purchase.

Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase.

13.A 1999 International 4900 DT 466E Teco bucket truck. It has a 60 foot reach. The bucket holds two people. It shows 134,145 miles on the odometer and 10,005 hours on the hour meter. It has a Diesel engine with an automatic transmission. There is a hydraulic winch under the front bumper. The starter relay may be bad. The seat is ripped. The side compartments work but need lube. The glass is all good. The tires look good. Manuals are included. This truck is ready to go to work. It was driven in.

Additional fees: Documentation fee $30.00, Registration tax $270.00, Plate fee $6.00, PSV Fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $10.00, and Sales tax will be 6.5% of final purchase price.

Minnesota State Law - when purchasing a vehicle, you must provide your Insurance Company, Policy Number, and Expiration Date, as we will need to have this information to bring to the DMV when we do the title.  A DOT number is only required if this vehicle is going to be used commercial.

14.A work/storage trailer with an office in the front and storage in the back. It measures 32 feet long by 8 feet wide. The office has an air conditioner. The front and rear have electric heat. The rear roll up door will need some work. The tires are Weather Checked. The contents of the trailer are included. There is no title or registration with this.

15.A shop built 8 x 12 flat bed trailer. This was built on a camper frame and has untested electric brakes. The tires are bias ply 15 inch and are weather checked. It does not have lights. It has a spare and a tongue jack. It would be a good farm or fish house trailer.  There is no title or paperwork for this trailer.

16.This is a vintage Swage Block for black smithing. It was made in Germany in what is believed to be in 1912. It is believed to be made by S&S. This weighs 365 pounds with out the very heavy duty custom stand. It measures 18 inches by 18 inches by a little over 3 inches thick. Overall height with the stand measures 27 1/2 inches. It is in very good condition and has what would normally be the perimeter stages facing upwards so it does not need to be flipped on its side to use it. This item is extremely rare. Anyone interested in black smithing needs to do their research on this.

17.A Savage Model 110 E in .243 caliber. The stock appears to be Walnut and has a metal butt plate. It has a Tasco scope and a leather sling. The stock is good but does have handling marks. The barrel has just a little rust trying to start but is still fixable.  Winning bidder must be able to pass a NICS test at time of purchase.

Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase.

18.A 202 pound Swedish Paragon anvil. It is believed to have been made in 1894. It is solid wrought iron. It has 100% rebound. It measures 27 1/2 inches long. The face measures 4 3/4 inches wide. Including the custom made heavy duty stand it measures 31 inches high.

19.An H&R Gunfighter Model 660 .22lr double action revolver. It has a 5 1/2 inch barrel. The receiver and cylinder have some light rust pitting. The barrel and the wood grips look good.  Winning bidder must be able to pass a NICS test at time of purchase and have either a Permit to Purchase or a Permit to Carry.

Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase and have either a Permit to Carry or a Permit to Purchase.

20.A 12 gauge single shot shotgun with a 30 inch solid ribbed barrel. The only markings on the gun are patent dates of Dec 15, 91. Aug 11, 96. And May 27, 02. The stock is cracked and has amateur repairs. The barrel has surface rust on the outside and pitting on the inside. The action needs repair as it will not hold the hammer back. This gun is for parts or repair only.  Winning bidder must be able to pass a NICS test at time of purchase.

Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase.

21.An 80,000 BTU Mr. Heater Big Max gas heater. This one comes with the orifices for both natural gas or propane. This unit appears to be new. It was tested and works.

22.A custom built striking anvil. The top is 2 inch thick AR 400 metal. It measures 8 inches wide by 18 inches long. With the stand it measures 20 inches high.

23.Black smithing tools to include 6 hammers and a tong.

24.Four assorted black smithing hammers and two tongs.

25.A Cobra Model FS380 pistol in .380 caliber. This appears to be in decent condition with a few light scratches and handling marks. It has been tested and works.  Winning bidder must be able to pass a NICS test at time of purchase and have either a Permit to Carry or a Permit to Purchase.

Reminder that the person's name on the invoice is the ONLY person able to pick up a gun and you MUST be able to pass a NICS test at time of purchase and have either a Permit to Carry or a Permit to Purchase.

25A.EFFECTIVE IMMEDIATELY!! BIDDERS NOT PICKING UP ON THE SCHEDULED DAYS - WILL NO LONGER BE ABLE TO BID!! THESE DAYS ARE SET ASIDE FOR THAT PURPOSE! SO PLEASE PLAN ACCORDINGLY - PICK UP DAYS AND TIMES MEAN PICK UP DAYS AND TIMES!!

26.A 2011 Chevrolet Impala LS with 141,685 miles on the odometer. This is a very nice and clean car with no visible rust or damage. The tires are good. The interior is good. It starts runs and drives. The factory remote start works. This was a county motor pool car and was well maintained.

Additional fees: Documentation fee $30.00, Registration tax $73.00, Plate fee $6.00, PSV fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $10.00, and Sales Tax will be 6.5% of final purchase price.

Minnesota State Law - when purchasing a vehicle, you must provide your Insurance Company, Policy Number, and Expiration Date, as we will need to have this information to bring to the DMV when we do the title.

27.A Remington Model 1100 LT20. It is a 20 gauge shotgun with a 27 inch barrel. It has one choke tube included. It is a light weight gun and shoots 2 3/4 inch ammo only. This gun appears to be unfired but does have a couple of very small storage marks on the barrel.
Winning bidder must be able to pass a NICS test at time of purchase.

Reminder, that the person's name on the invoice is the only person able to pick up a gun and you must be able to pass a NICS test at time of purchase.

 

28.A Ruger Super Blackhawk in .44 Magnum caliber with a 7 1/2 inch barrel. Mechanically it is in good condition. There is holster wear in the blueing on the barrel and on the cylinder.  Winning bidder must be able to pass a NICS test at time of purchase and have either a Permit to Carry or a Permit to Purchase.

Reminder, that the person's name on the invoice is the only person able to pick up a gun and you must be able to pass a NICS test at time of purchase and have either a Permit to Carry or a Permit to Purchase.

29.Three gun cases and a shotgun sling. The two rifle cases are for a scoped gun and measure 48 inches long. The shotgun case measures 52 inches long.

30.A Remington Model 1187 Special Purpose 12 Gauge Shotgun with a 30 inch barrel. It includes one choke tube and a sling. This gun appears to be unfired but does have a couple of minor scratches on the barrel from storage. Winning bidder must be able to pass a NICS test at time of purchase.

Reminder that the person's name on the invoice is the only person able to pick up a gun and you must be able to pass a NICS test at time of purchase.

31.A 2007 Chevrolet Cobalt LS with 88,190 miles on the odometer. This is a very nice car with no visible rust or body damage. The tires are good. The interior is good. This was a County Motor pool car and was well maintained.

Additional fees: Documentation fee $30.00, Registration tax $35.00, Plate fee $6.00, PSV fee $3.50, Transfer tax $10.00, Title/transfer fee $8.25, State filing fee $10.00, and Sales Tax will be 6.5% if over $3,000.00 or $10.00 if under $3,000.00

Minnesota State Law - when purchasing a vehicle, you must provide your Insurance Company, Policy Number, and Expiration Date, as we will need to have this information to bring to the DMV when we do the title.

32.A refrigerated air dryer made by Great Lakes Air. For plasma cutting, painting or any time dry clean air is needed.

33.An AMT model 5171 Radial Drill Press. 12 speeds. 5/8 inch Chuck. This was mounted on lot 39. Tested and works.

34.A 30,000 BTU Blue Flame Natural Gas Heater. Vent free. No electricity is required. It can be wall mounted or free standing. This is new and has never been used. But it has cosmetic shipping damage on one side that will not affect the heater. This is for natural gas only.

35.A cordless electric grease gun made by Lincoln. 18 volts. This appears new but came with grease in it. Tested and works.

36.Remington Bucket O Bullets. 1400 rounds of .22lr ammo. 36 grain Plated Hollow Point. 1280 FPS.

37.A new wheel kit for a Generac 5,000 watt generator. This may or may not be adaptable to other generators.

38.A StrikeMaster Mag 2000 ice auger with an 8 inch cut. It starts and runs.

39.A custom built welding table. It measures 4 feet wide by 31 inches deep. The top is 1/2 inch plate steel.

40.An industrial air hose reel with 50 feet of 3/8 inch hose. There is a small spring for the Ratchet that is broken it should be an easy fix. There is also a loose bearing.

41.Black smithing tools to include four hammers and an adjustable wrench. One hammer says Champion Tool Co. Meadville Pa.

42.Black smithing tongs and five hammers.

43.A Milwaukee model 4245 SteelHawg Mag Drill. This has a self Oiler. The seller states that this works as it should.

44.A Diablo Steel Demon 14 inch Carbide Metal Saw. This is for all ferrous metals. It requires a 1 inch arbor. This has been used but very little.

45.Two 3/8 inch chain binders. One is made in China. One is made in USA.

46.A battery charger made by Solar. Model 141-168. 10/2 amp 12 volt and 10 amp 6 volt. Tested and works.

47.A used Klutch brand Mini Milling Machine. It uses R8 Taper bits. Tested and powers up.

48.A Delta Shopmaster bench top drill press. Model DP300. It has five speeds. It stands 34 inches tall.

49.Black smithing tools including four hammers and one tong. Also a small broken anvil from a vice.

50.A Hotbox Portable Infrared Heater. 1500 watts. 120 volts. 12.5 amps. It has an adjustable thermostat from 60-90F degrees. Tested and works.

51.An electric 12 volt trailer tongue jack. It has a light and a level built in. The plug in connector and the emergency crank handle are missing. This was tested and works.

52.8 six inch long Boxer Tiedown Aluminum Logistic Track. New

53.Two 4 inch single row Diamond grinding cup wheel. For Masonry, concrete and stone. New

54.Two 3.4 Oz. containers of O'Keefe's Working Hands Hand cream. For dry hands that crack and split. New

55.A new in the box DeWALT model DW660 Cut-out Tool.

56.Two tires. Bridgestone Blizzak size 225/45R17. They have 6/32 tread on them.

57.A new 38 inch fire ring. This was custom made from 3/16 metal.

58.A vintage 4 1/2 inch bench mount vise made by Rock Island number 574. It is a little stiff from non-use and could use some lube. This would be a good one to sand blast and restore.

59.A double bit axe marked Marshall Wells and a single bit axe marked True Temper Kelly Perfect.

60.A Homelite Ranger chainsaw with a 16 inch bar. A factory carry case is included. The seller states that it will start good when cold but starts hard when warm.

61.Electrical items. A new light fixture, new recessed light fixtures, switch covers, soldering guns, electrical tester, and a multi-meter.

62.Many sheets abrasive cloth for a belt sander. There is also numerous disks of sand paper for a 6 inch disc sander, some tubing, and a jig saw.

63.Miscellaneous items to include two 4.00-6 Pneumatic tires, tire covers, magnetic socket holders, a Wrist Rocket, tape measures, spring u-bolts, and hose clamps.

64.A Wayne 1/2 horsepower Utility Pump. This was tested and it pumps but it WILL need brushes in the motor.

65.A Hotbox Portable Infrared Heater. 1500 watts. 120 volts. 12.5 amps. Tested and works.

66.A Warn 120 volt PullzAll. This appears to have had very little use. But when when the trigger is pulled all the way for top speed it quits. This happens in both forward and reverse. Included is a second PullzAll that looks like it fell out of a truck. But the control board and the switch appear to be OK.

67.A 115 volt gear oil pump. High volume, high pressure pump. 2 horsepower. 13 GPM. This is for pumping new high viscosity oil. Tested and works.

68.4 one foot Aluminum Boxer tie down tracks. New

69.Three axes. The broad axe has no markings. It is sharpened on one side only. The single bit axe is marked Plumb. The double bit is marked Collins.

70.A free standing wood fireplace called a Defiant Encore made by Vermont Castings. It measures 27 inches wide by 26 inches high. It appears to be in usable condition but there is an animal nest in it that will have to be cleaned out. It looks like the animal itself was deported as an undesirable some time ago.

71.A 12,000 pound capacity trailer tongue jack. This appears to be new. It can be bolted or welded on.

72.A computer cabinet for dusty or dirty shop type conditions. There are keys included.

73.An Ion 40 volt electric ice auger. It drills a 7 inch hole. There is a 24 inch extension and a battery charger included. This has been tested and works.

74.A shop built work bench that measures 8 feet long by 3 feet wide by 41 inches high. It is made from 2 x 8's, 2 x 10's and 4 x 4's with the top and the bottom shelf being 3/4 inch plywood. It is on casters for easy maneuverability.

75.A Dave Genz Fish Trap Voyager, 3 person Portable fish house. There are no mouse holes or wear holes seen. It has a 12 volt rope light and a storage compartment included. There are three padded seats and a travel cover also. This is easy to set up and to take down. It is in good condition.

76.A Crossman Powermaster 66 .177 pellet or BB gun. It is a pump up gun. It is in decent condition with a few minor light rust spots on the barrel. Tested and works.

77.A 7-UP cooler with a Fooseball table built into the top. This is on caster wheels and has a storage tray underneath. One of the players is missing his head. This measures 27 inches long.

78.A 95 gallon fuel transfer tank for the back of a pickup. It is designed to accompany a cross the box tool box. The fuel pump does not work. It needs paint and the cap is missing.

79.A Gentec Oxy/Acetylene welding/cutting set. This is new but it is missing the Oxygen regulator and check valves.

80.3 ProCom 10,000 BTU propane fish house/deer stand heaters. All of these three have issues. They either will not light at all or will light but shut off after a few minutes. These are for parts or repair.

81.A Briggs and Stratton 8 horsepower Industrial Commercial engine. It turns over and has compression.

82.A Kawasaki FE120 four stroke engine. It turns over with compression.

83.A Honda 185s three wheeler. Body wise this is in rough condition. The engine starts and runs. The tires look to be in decent condition. The headlight works. There are no brakes. The plastic that is left is sewn together so it looks like Frankenstein junior. But there is plastic included to replace the rear fenders. There is no paperwork for this.

84.Two metal 55 gallon drums of used oil. Both are full or close to full.

85.A 10 ton hydraulic ram system. This set appears to be new but the Ram Pump does not work. The pump will need repair or replacing. One wheel on the plastic rolling case is bad also.

86.An unopened case of 12 Aluminum framed hacksaws. They hold 12 inch blades.

87.24 caulk savers. These are for resealing opened tubes of caulk.

88.A small table top Foosball game. When assembled this measures 19 inches long.

89.Two 12,000 pound trailer tongue jacks. One is possibly new or had very little use. The other is used and may need a little TLC. Both are missing their operating handles.

90.7 pieces of 20 foot long 1 1/2 inch galvanized pipe. There are a couple of valves, elbows, and couplings also.

91.A large commercial beverage cooler made by Superior Products. It measures 102 inches long by 30 inches high by 41 inches tall. It powers up, but does not put out cold air.

92.A Hitachi DVD+HDD hybrid camcorder. It appears to be complete with accessories and a carry bag.

93.A Vexilar Model FL-8SLT flasher mounted in a Vexilar case. It has a depth range from 0 to 120 feet. A battery charger is included. Tested and works.

94.A Versa'Larm monitoring system. This includes the alarm, a sump monitor, and a flood detector. Other monitors and an auto dialer can be purchased separately and used with this system.

95.Vasque Gore-Tex with International Technology Size 10-1/2 boots.

96.Pueblo 12 ft x 7 ft Hex Dome tent with side rooms that sleeps 5, carry weight is 9 lbs. Box has been open but contents do look like new.

97.Nice Framed picture of Copper Harbor Light House from The UP of Michigan from Joe Cilluffo.

98.Framed Picture of Glimpse of the past Civil Engineering Collection of Genuine Postage stamps.

99.5 Full Boxes of 12 Gauge Shotgun shells that include 3 boxes of 12 ga. 1-1/4 Oz. 3-3/4 Dr. , 1 box 4 shot and 2 boxes 6 shot and 2 boxes of Remington 6 shot 1-1/8 Oz. 3-1/4 DR.

100.4 Full boxes of 12 Gauge Shot gun shells that include 2 boxes of Remington 8 shot, 1 box of Winchester 8 shot and a box of BBX2 Remington SPBBX2 Steel Shot.

101.New Tools that include Bench Dog Trim Tool,Wiss side cutters with Belt pouch, 2 Arco Sanding/Grinding discs and a 10 pack of assorted bits.

102.3 Rigid tools that include 2 Pipe cutters 1/8 to 1-1/8 and 1/4 to 1-5/8 , 8 in. Pipe wrench and a Craftsman tubing bender.

103.2 New Gerber Metolius Fixed Blade knives with Sheaths.

104.New Jiffy Power Ice Drill Adjustable Extension shaft for 6 in. and 12 in. Ice drills.

105.Temro Electric Battery Warmer. Lower Radiator Hose Heater and 2 Freeze Plug/Immersion Heaters. All are New in packaging.

106.A cordless 18 volt LI-ION 1/2 inch drive impact. This appears to be new but either the battery is bad or the charger does not work.

107.A 95 gallon fuel transfer tank for the back of a pickup. It is designed to be used with a cross the box truck tool box. It needs paint and has a broken fitting were the fuel pump mounts.

108.A size XL vintage snowmobile suit made by UPC that is in nice condition.

109.A size XL winter work parka. It is quilted and has a hood. These are tough and warm jackets. This one appears to have very little if any use. It includes a leather cap and a baseball cap.

110.A retired Yield sign. It's just a little rough and non-reflective. It measures 24 inches high.

111.Various pillow blocks, cable clamps, eye hooks, and more.

112.Compressor parts, u-bolts, spot lights, and more.

113.Miscellaneous to include vintage tin containers, a small shop built anvil, grease guns, tools, and more.

114.10 finished or mostly finished Planer boards, and 34 boards that need lead, paint and hardware.

115.A Delta Shopmaster Bench Drill press. This powers up and the Chuck spindle works freely, but the pulley on the motor is missing.

116.A heavy duty shop built press. The hydraulic jack that powers this press is not marked, but appears to be about a 20 ton. It is not operating and acts like it is out of oil.

117.A set of eight suit case counter weights for a tractor. The mounting bracket measures 21 inches wide.

118.New in Wood Case Craftsman 30 piece Carbide tipped Router bit Set.

119.Cast iron 2 Burner Propane Cooking Stove that looks have never been used. Measures 20-1/2 in W x 11 in. D x 5-1/4 in. H.

120.Shop tools that include 1 New DeWALT DW7051 Length stop Extension, DeWALT DW7052 Miter Saw clamp, Digital Dremel Tool , Ryobi 3/8 in. Drill with a long cord and a Black and Decker Wall Anchor Tool kit.

121.Approximately 16 Shop built rolling frames with 5 inch caster wheels. The frames are made from 1 1/2 x 2 inch tubing. They measure 28 inches long by 19 inches wide. Some of the wheels have the outer layer of rubber missing.

122.6 packs of 240 grit and 6 packs of 320 grit wet/dry sandpaper. Each pack has five sheets.

123.6 packs of 240 grit and 6 packs of 80 grit wet/dry sandpaper. Each pack has five sheets. Each sheet measures 7 inches by 4 inches.

124.10 packs of 150 grit and 4 packs of 240 wet/dry sandpaper. Each pack has five sheets.

125.A new 8 inch hunting/survival knife made by Grip.

126.8 packs of 240 grit. 5 packs of 150 grit, 4 packs of 80 grit, and 2 packs of 320 grit sandpaper. Each pack has five sheets.

127.A heavy duty commercial table that measures 60 inches long by 24 inches wide by 34 1/2 inches high.

128.3 New Dickies Long Sleeve Work shirts, 1 New XL Hanes pocket T shirt and 3 New Fruit of the Loom X-Large T Shirts.

129.10 plans for Do it yourself Deck and Handicap Ramps magnet kit.

130.A heavy duty commercial table that measures 60 inches long by 24 inches wide by 34 1/2 inches high. The top has a little cosmetic damage.

131.A used bathtub that measures 59 inches long by 36 inches wide by 19 inches high. It includes the faucets.

132.3 New Pairs of jeans that include 1 pair of Levi's 34 x 32 Straight Leg Regular Fit and 2 Pairs of Lee's 34 x 32 Regular Fit Boot Cut.

133.New in the box Timberland Men's size 10 Pro Series Workboots with Steel Toe/Electrical Hazard protection and Slip Resistant soles.

134.New Propane 5152A700 lantern with broken glass and comes in a plastic case and Battery Operated Headlamp that was tested and works but will need batteries.

135.An Oregon model 410-120 chainsaw sharpener. This is new in the box and will need to be assembled.

136.3 New Pairs of 36 x 32 Pants that include 1 pair Big Yank Jeans, 1 pair corduroy Lee and 1 pair of Toughskins.

137.5 gallon Bucket with a ICE PAC buddy bucket wrap, there is a Styrofoam cooler inside with lid storage under the padded seat, Frabill Fish-N-Fun 4.5 qt. minnow bucket, small Plano Tackle box with ice fishing supplies, Pinch weights and some Trilene Micro ice line.

138.Salomon Contagrip CX with Thinsulate in Size 10 slip on shoes. These are in like new condition.

139.14 New x-large T-Shirts that include brands Wear Guard tough T's, Lee, Wear Guard and a Pack of New 34-36 Fruit of the Loom Briefs and 1 Polo shirt.

140.Approximately 118 square feet of Legend brand porcelain tile. It is light brown in color. Each piece measures 13 x 13 inches.

141.4 New Lawn Mower Blades measuring 17 in., 2 Oil filters for Kohler Engines. Cub Cadet Fuel Filter and a Sears Rear Wheel Weight install kit.

142.2 New Chicago Cutlery Shears, 1 New Chicago Cutlery 2.75 in. Parer Knife and 2 New Rachel Ray Knifes that include a Sammy and a Off Set Bread Knife.

143.All boxes New and appear full that include one 5 Lb box of Grabber 8 x 1/2 in. Self tapping screws, 4 lbs of Grabber 6 x 1/4 in. Pan head screws, 4 lbs of Grabber 6 x 1/2 in. Pan head screws, 1/4 x 20 x 1/2 Remington Threaded studs with 1 in. Shank, 2 boxes of Remington Brown Level 2 Power Loads and 2 air valves.

144.Shop Supplies that include 2 New boxes of 50 count Mirka Hook and Loop 5 in. Diam. Sand paper, one 100 grit and one box of 180 grit. 2 boxes of Duo-Fast staples,Box of new Remington 1/2 in. Conduit Clips with 1 in. Pin, 1 Box of 2 in. Bostitch Angled Finish nails, a Drum Sanding Kit and more.

145.11 New x-large T-Shirts that include brands Hanes, Fruit of the Loom, Towncraft, and Royal Comfort.

146.New 42 x 30 Riggs by Wrangler Workwear Relaxed fit Carpenter pants.

147.7 New colored Size Large T-Shirts with brands Fruit of the Loom and St. Johns Bay.

148.A Flea Marketers special. At least 45 kits to repair eyeglasses. They are marked $3.99 each.

149.Two new 4 inch Single Row Diamond Grinding Cup Wheel. For concrete, Masonry and stone.

150.Two 3.4 Oz. containers of O'Keefe's Working Hands Hand cream. For dry hands that crack and split. New

151.Tools, telephone wire repair, testers, and more.

152.Three new security lights. 300 watt Quartz Halogen.

153.Various plumbing parts, brass fittings, galvanized fittings, plastic fittings, a cordless drill, flux core welding wire, and more.

154.A peddle exercise machine made by Lite Gear. Tested and works.

155.2 New Husky Carpenter Nail/Tool pouches and 2 New Mcquire Nicholas belt pouches , one New Dead on Tools 14 Oz. Exhummer Tool Wrench and a Pair if Rubber gloves.

156.New Bell and Gossett 1/2 HP 115v Alternating Current Electric Motor with a 1/2 in. Arbor.

157.8 New Pairs of Heavy Duty Sock that Fit 10-15 Sizes That include Brands Winchester, Field and Stream and Wigwam all in a Plastic bin with Lid.

158.New Paladin Sealtite Pro Coax Crimping Tool and Paladin LAN ProNavigator Data and Coax Tester.

159.PLANO Tool box filled with all kind of New Shop supplies and Tools, New Honeywell thermostat, Magnavox Radio,18 in. Hammer handle, New Stihl chainsaw chain, and much more.

160.New Wedge Smart Level, batteries are dead so untested. 48 in. Long.

161.New King Flannel Bed Sheets that include 1 Deep fitted sheet, 1 King flat sheet and 2 pillow cases, and 1 set of Casual Classics 250 threads per Square in. Fitted King sheets.

162.10 New Dress Shirts sizes 17 and Large.  Brand names, such as Lands End, Stafford, Wentworth, Finalist, and Sears.

163.New men's Clothing items that include 1 pair of Leather XL gloves, 1 Thinsulate stocking Hat, 1 XL Long Sleeve Fieldmaster Cotton Shirt, 1 pair 38 x 30 Dickies white pants (has some stains) 2 Brown One size fits all Face masks, 2 one size Fleece Balaclavas and 2 New Leather Wallets.

164.Measure Master Rolatape, Model MM30 Distance measuring stick with extendable handle. This is used, but tested and works.

165.An add on propane pressure gauge that will tell you if your tank is getting low. This would be real handy in the deer stand or a BBQ Grill. It will only fit the newer style valves.

166.Four BF Goodrich All Terrain TA tires. Size LT285/65 R18. They have 3/32 inch of tread.

167.A Craftsman snow blower with electric start. This starts and runs but the engine runs wide open and does not idle down.

168.Bostitch Model N16 Heavy Duty Nailer that will drive 6d, 8d,10d,12d, and 16d nails. This has been used and untested.

169.Four tires on 2006 Ford rims. Three of the tires are size P265/70R 18. One is size LT275/65R 18.

170.New Micro V-Groove laminate flooring. Three packages that total 43.7 square feet. Each piece measures 49.72 inches long by 5.27 inches wide. They measure .47 inches thick.

171.New Vinyl flooring. 23.25 square feet of Highland Hickory colored pieces. Each piece measures 59 inches long by 9 5/8 inches wide.

172.60 square feet of new Mannington Adura vinyl flooring. Each piece measures 48 inches long by 5 inches wide.

173.36 square feet of new vinyl Adura flooring. It is Cascade Sea Mist in color. Each piece measures 12 inches wide by 24 inches long.

174.New vinyl flooring made by Mannington. It is Butternut in color. There is 43.5 square feet. Each piece measures 35 3/4 inches long by 3 3/4 inches wide.

175.43.5 Square feet of new Mannington Adura vinyl flooring. It is Canadian Maple Natural in color. Each piece measures 35 3/4 inches long by 3 3/4 inches wide.

176.21.3 square feet of vinyl flooring made by Mannington. It is Obsidian in color. Each piece measures 16 x 16 inches.

177.60 square feet of vinyl flooring made by Mannington. It is concrete in color. Each piece measures 16 x 16 inches.

178.10.5 square feet of Armstrong Premium Tile Flooring. Each tile measures 8 x 8 inches.

179.21.3 square feet of Mannington Adura Vinyl flooring. It is Cameo in color. Each piece measures 16 x 16 inches.

180.40 square feet of vinyl flooring. It is Essex Oak Honeytone in color. Each piece measures 35 3/4 inches by 3 3/4 inches.

181.Two double bit axe heads. One is normal size and the small one is child's size. Also a hatchet and a chipping hammer head.

182.93 square feet of vinyl flooring made by Elevations. The color is called Prima Reclaimed Wood. Each piece measures 47 5/16 by 7 1/8 inches.

183.55 square feet of vinyl flooring. Each piece measures 48 by 6 inches.

184.A set of MAKITA 18 Volt, Lithiun-Ion tools. There is a variable speed, drill / driver with a two speed transmission, a 1/4 hex drive, impact driver, a LXT adjustable work light, charger, two batteries, and a tool bag. Everything appears to work.

185.A bench mount transmission support. It holds the transmission for disassembly, and reassembly. Plus, a shop built tool for distributor drive oil pumps. Attached to a drill, it delivers oil to the engine after a rebuild.

186.A DiVinci model D-710 surround sound. It comes with seven speakers and a remote. This is untested.

187.Craftsman 75th Anniversary 3/8 in Ratchet in Wooden Case. 1927-2002. Stamped number 27147.

188.Workforce Professional Heavy Duty Caulk Gun. Also included a Large and small caulk gun. Large gun is missing the press plate.

189.A Weslow Inversion Flex System. This is for hanging upside down to relieve back pain.

190.This is a variety of different items. There is a set of 4 older double hooks that could be repainted to use for a bunch of different ideas. A green glass bowl with Napco from Cleveland O on the bottom. 5 sets of sunglasses, No. 450 Vanguard flare, 2 bottles, a mason jar that could be used for soap or other liquids, and more.

191.Drill Doctor Model 250 drill bit Sharpener powers up but not tested after that. Also an open face Striker 0-500 Fishing reel with a gear ratio of 4.6 1 and an older Pflueger Skilkast no. 1953 level wind fishing reel

192.Jeno's pizza presents music to eat pizza by featuring the Duluth Accordionaires record. Two cute men bottle holders, a nickel plated gun mug. Two different vintage coffee bean mills that appear to work as they should. Two big blue H.G. Co fence post toppers in good shape a small No. 9 Hemingray and a brown topper.

193.A beaded seat cushion, a pair of new Crocs sandals men's sizes 9 or women's size 11. A pair of Air Walk women's shoes size 8 1/2. A John Deer tractor piggy bank that does have a chip in it and a few markings, but is still in useable shape. Four new sets of 4 plastic tumblers, pink, blue, red and turquoise, and more.

194.Miscellaneous garage supplies. There are 3 jacks with handles, snowmobile dollies with missing wheels, various car parts like Universal joints and ball bearings. Also, miscellaneous gas caps and other caps and more.

195.Miscellaneous propane supplies. There are hoses with regulators, 4 smaller regulators, 2 bigger Rego regulators, a Humphrey Propane Light, and two other propane lights.

196.Miscellaneous lot of tools. There is a tackle box with various wrenches in it, 8 different blades with 6 appear to be used and 2 look to be new. There is a tape measure, some black straps, a used electrical cord, a hand saw with extra blades, and more.

197.2 vintage rollers from old hand crank washing machines that still roll. Also, a propane lantern with a propane bottle, a new Paulin Humphrey gas light for indoor use only, a round fishing net with weights and a rope, a camouflage foldable seat, and more.

198.A Set of 4 used tires and rims. Size 205/55R16. Cooper CS4 touring tires that seem to have about half tread left on them. The rims came off of a Mazda and have pitting on them.

199.Approximately 1/2 a box of coil roofing nails. A 50 Lb box of nails that appears to be full. A caulk gun, scraper, and a hole punch, and more

200.30 DVD's. There is a variety of titles from comedies to thrillers. Some are unrated. In this there are three blue-ray. Please see pictures for the titles.

201.38 x 30 Carhartt insulated coverall Bibs. These are a little dusty, but appear to be new and never worn.

202.X-Large Tall size Carhartt jacket with lighter liner. Jacket is in like New condition.

203.A pair of military cold weather boots size 9D. They are marked USMC.

204.New Kitchen items that include Knives, Strainers, graders, Seafood picks and more.

205.16 New Closet Rod Shelf Brackets. Each measures 13 in long.

206.A pair of Slalom skis made in the USA, poles and Spyder boots that are marked 4 1/2. 

207.Mostly parts for a 93 Chevrolet S-10 or a 2000 Chev pick up. There is door panels, a hood, and lights. Also, a Husqvarna chain saw for parts and a plastic tank.

208.A gas fire place made by Hunter. Model number HFS40. 35,000 BTU's. It includes stovepipe, a remote control, and fire place cleaning tools. It measures 27 inches wide by 32 inches high by 24 inches deep. This was in operating condition when it was removed from service.

209.A wood hutch that is marked Keller in one drawer and is in nice condition. The top has 2 glass shelves, has a light in it - but is untested, and is removable The bottom has 2 large drawers with one having 4 dividers in it.  Under the drawers are 3 doors that open and it has 1 shelf in it.. It measures 54 inches wide by 77 inches high.

210.A Golds Gym Power Spin 210 U exercise bicycle. It has magnetic resistance and an MP3 sound system.

211.21 porcelain figurines sold by NBM Bahner AG. Licensed by Enesco. All appear to be in good condition.

212.A woman's bowling ball and bag. The ball is marked Persoal 300 8TLA024.

213.Original Chippewa (Made in USA) boots in a size 9 1/2, that are in very nice slightly used condition.

214.Sixteen small cast horse figurines. They range in size from 2" to 4" tall. They are all tarnished, and need to be cleaned and polished.

215.Three folders with hockey trading card from the Atlantic, Central, and Pacific Divisions. Plus MINNESOTA VIKINGS, 20th anniversary of the 1969 NFL Champion cards, with crime prevention tips.

216.ANGELS. One is meant for a garden, and three others for indoor use.

217.Twelve cast horse figurines. All have tarnish, and needs to be cleaned and polished.

218.Four vacuum cleaners that have not been tested. Also, included are six bottles of fiberglass Shine On and three boxes of QuickSeam.

219.A 42 in. Dining room table, with two 11 5/8 in leaves. It is constructed of particle board, with a laminate top. It is a good starter table, crafting, or just to fill your needs.

220.3 Oil Filter Wrenches. 4 Pairs of Automotive Splash Guards, 2 small 2 large and a Valvoline Fluid Lubricant Pump.

221.Little Playmate Cooler, New Aladdin Super Insulated Mug, 2 Stainless Steel Pet Food bowls and 100 ft. Of New 1/4 in. Polypropolene 600 Lb. Test Rope.

222.New Dead Bolt Hitch and Coupler Lock Set with matching keys.

223.Train tracks, an air soft gun, lots of untested AA batteries, 1988 Football cards, Bose headphones that need cord repair, and more.

224.A wood 6 foot step ladder and a small tricycle.

225.A new in the box recycle container and a vintage medicine cabinet with a leaded stained glass mirror. The mirror measures 18 inches wide by 26 inches high including the frame.

226.Box of Electrical supplies that include New Electrical Boxes, 4 Weather proof boxes, Wall switch plates, Light switches, Dimmer switches , 1/2 in. conduit clips with 1 in. Pin and More all in a Plastic tote with lid.

227.Cabelas XL Reg. Long sleeve Camo button up shirt , New 1 Big Mac XL Flannel shirt, New 1 St. John's bay XL Flannel shirt and A Dunn's Camo sport bag.

228.3 New Arias Wind Chimes that are made for the weather with Anodized Aluminum, Finished Redwood and Made in the USA.

229.7 Plastic Fun Signs, each measure each 10-1/2 x 7-1/2 in. Each.

230.Easter is coming. Any little girl would love to have one of these glass Easter baskets filled with candy or flowers. And so would Mom. The larger one is from Tiara. The smaller one is believed to be Fenton. There is no damage seen on either one.

231.Miscellaneous glass lot to include a vintage Hull vase. A Crystal ice bucket from Princess House with ice tongs. And two heavy lead Crystal wine glasses for the Bride and Groom. All appear to be in in good condition.

232.An RCA four head VCR and a Motorola 4D TV video cipher RS Model DSR922, both with remotes.  

233.A KLH AM/FM Stereo Receiver Model R3000M with two small book shelf speakers.

234.A Panasonic Model RS-876AS Audio Entertainment Center. It has AM/FM, 8 track, cassette, a record turntable and it records. In 1973 this was a school kids must have.

235.A Toshiba Satellite Receiver Model TRX1800 video cipher 11 Plus. A Magnavox VCR/DVD player model number DV220MW9. And Motorola High Definition Decoder.

236.Vintage Camera's. A Kodak Instamatic M6 movie camera with the original box and carry case. A Kodak XL55 movie camera with Case. A Brownie Junior six-20, a Kodak Brownie Twin, a Kodak 10, a Polaroid One Step, film, and more.

237.A Tracker Premier System 50 Satellite Receiver. It comes with a remote and owners manual.

238.A tracker System 10 Plus video cipher RS made by HTS

239.A General Instrument 4D TV Digital Satellite Receiver. It includes the remote and a manual.

240.VHS movies, DVD's, and 8 track tapes. There are numerous title and categories.

241.A Sharp VHS Camcorder, a Zenith 11 band portable radio, a Pioneer Model PD-F506 Compact Disc Player, and a pair of Samsun headphones.

242.Miscellaneous electronic items. Vintage tape players, USB cords, CD/DVD cleaners, a scanner, remotes, a screen for home movies, and more.

243.Like new Women's size 7 Bearpaw winter boots. Fleece lined. A very warm boot that is machine washable.

244.A fruit bowl with a banana hanger. And a heavy cup holder. Both are in good condition.

245.A Kenmore Powermate vacuum cleaner. Tested and works.

246.A heavy lamp with a glass shade, a vintage glass Easter Basket, two new Twig The Fairy books, a vintage Frankoma ashtray, and a vintage waste basket.

247.A handy bunch of miscellaneous items. Sand paper, pliers, steel wool, paint brushes, blades, wrenches, tape measure, scraper, and a flashlight. All items are new.

248.12 three inch throw away brushes and two higher quality 3 inch brushes.  All are new

249.It looks like something to hurt yourself with. Five knife blades on a throwing star. It would make a good decoration.

250.A new Kabob Basket for Cooking Kabobs, hot dogs, or fish over a camp fire.

2019 Lots4Bid.com